# RESCUE Jumper: Compact Robot for Urban Search and Rescue

> The research introduces the RESCUE Jumper, a compact mobile robot designed specifically for urban search and rescue operations. Weighing only 125 grams and featuring a width and diameter of 6.2 cm, th...

**Source**: arxiv.org | **Published**: 2026-11-19 | **Type**: research

## Key Facts

- Integrate RESCUE Jumper technology to enhance emergency response capabilities in urban environments.
- Leverage compact design for efficient navigation in tight spaces during rescue operations.
- Utilize adjustable jumping mechanism to improve obstacle overcoming in difficult terrain.
- Train rescue teams on deploying small robots to optimize operational efficiency and safety.
- Invest in further development of adaptable robots for diverse emergency scenarios and environments.

## Summary

**Paper:** [RESCUE Jumper: A Centimeter-Scale Rolling and Jumping Robot for Search and Rescue](https://arxiv.org/abs/2611.23531)

**Authors:** Kiran Marques, Shashwat Singh, Ben D'Ambrosia, Zeynep Temel, Melisa Orta Martinez

\## Executive Summary

The research introduces the RESCUE Jumper, a compact mobile robot designed specifically for urban search and rescue operations. Weighing only 125 grams and featuring a width and diameter of 6.2 cm, this robot can navigate confined spaces that are often inaccessible to human rescuers. One of the main challenges with small robots is their ability to overcome obstacles, such as steps or gaps, which this robot addresses through a combination of rolling and jumping capabilities.

The RESCUE Jumper employs a unique mechanism that allows it to switch between rolling and jumping. It achieves this through the use of two actuators. When the wheels rotate forward, the robot rolls, but when they rotate in reverse, they wind a spring steel tail. This tail stores elastic energy, which is released to propel the robot into the air. The speed at which the tail is wound can be adjusted, influencing both the direction and height of the jump. The research demonstrates that by varying the winding speed from 0.75 radians per second to 8.73 radians per second, the robot can control its jump direction, transitioning from backward to forward jumps.

The jumping capabilities of the RESCUE Jumper are notable. It can achieve a maximum height of 9.2 cm and a lateral displacement of up to 11.2 cm. The research outlines a model that predicts the robot's jumping behavior in three distinct phases: the release of the tail to determine the contact point and orientation, the straightening of the tail until liftoff, and the ballistic flight phase that predicts both jump height and distance.

Qualitative testing has shown that the RESCUE Jumper can effectively maneuver through cluttered environments, which is critical in search and rescue scenarios where obstacles are common. These tests, while not quantified with specific performance metrics, suggest that the robot could operate successfully in real-world situations.

The findings from this research may inform future designs of small-scale robots, particularly in how they can integrate jumping mechanisms to enhance their functionality in challenging environments. Applications could extend beyond search and rescue to include inspection tasks in areas that are difficult for larger machines or humans to access. By leveraging the unique capabilities of jumping and rolling, the RESCUE Jumper could represent a significant advancement in the field of robotics for safety and emergency response.

\## Academic Abstract

Centimeter-scale robots are promising for urban search and rescue because they can enter confined spaces that are inaccessible or unsafe for humans. However, their small size limits obstacle traversal after deployment. This paper presents the RESCUE Jumper, a 125 g mobile robot with a 6.2 cm width and 6.2 cm diameter wheels that combines ground rolling with jumping to traverse steps and gaps that exceeds its rolling capability. The RESCUE Jumper uses its two actuators for both rolling mode and jumping by reversing the direction of wheel motion. Forward wheel motion enables rolling, while reverse wheel motion winds a spring steel tail to store elastic potential energy and release it for jumping. The RESCUE Jumper varies tail winding speed to control jump direction, transitioning from backward to forward jumps as winding speed increases from 0.75 rad/s to 8.73 rad/s. The launch angle of the jumps ranges from 45 degree to -11 degree with respect to the vertical axis, reaching a maximum height of 9.2 cm and a maximum lateral displacement of 11.2 cm. We model the winding speed-dependent jumping behavior in three phases: tail release to determine the contact point and robot orientation, tail straightening until liftoff, and ballistic flight to predict jump height and lateral displacement. Finally, qualitative tests highlight the robot's locomotion in cluttered, real-world environments. The model and experiments presented in this work can inform future designs of space-constrained jump mechanisms in centimeter-scale robots for search and rescue and inspection in unstructured environments.

## Frequently Asked Questions

**What business problems does the RESCUE Jumper solve?**

The RESCUE Jumper addresses the challenge of conducting search and rescue operations in urban environments, particularly in confined spaces that are difficult for human rescuers to access.

**Which industries could benefit most from the RESCUE Jumper?**

Industries such as emergency services, disaster response, and urban planning could benefit most from the RESCUE Jumper, as it enhances capabilities in search and rescue scenarios.

**What are the practical implementation considerations for using the RESCUE Jumper in a business context?**

Practical implementation considerations may include ensuring the robot is equipped with the necessary sensors for navigation and obstacle detection, as well as integrating it into existing rescue protocols and training personnel to operate it effectively.

**What resources or expertise are needed to utilize the RESCUE Jumper effectively?**

Utilizing the RESCUE Jumper effectively may require expertise in robotics, engineering for maintenance and repairs, and training for rescue teams to operate the device in various scenarios.

**What competitive advantages could the RESCUE Jumper provide to businesses in the search and rescue domain?**

The RESCUE Jumper could offer competitive advantages by improving efficiency in locating and assisting victims in hard-to-reach areas, potentially reducing response times and increasing the overall effectiveness of rescue operations.

## Links

- [Read on Welcome.AI](https://welcome.ai/content/rescue-jumper-compact-robot-for-urban-search-and-rescue)
- [Original source](https://arxiv.org/abs/2611.23531)

---

Source: Welcome.AI | https://welcome.ai/content/rescue-jumper-compact-robot-for-urban-search-and-rescue